[mpa] 1# End Burn Rocket Tooling

[Myrl Wieland]

Stewart it is a end burner tool set, the spindle just goes into the fuel grain about 1/8", if your nozzle is the correct size. Use for drivers, dolas, wheels, and also whisle rockets.



-----Original Message-----
From: Stewart Irsik via MPA <mpa at kclo3.com>
To: Midlands Pyrotechnic Association Mailing List <mpa at kclo3.com>
Cc: Stewart Irsik <stewart_1322 at yahoo.com>
Sent: Sat, Dec 12, 2015 9:06 pm
Subject: Re: [mpa] 1# End Burn Rocket Tooling



I'm interested.  The spindle looks awfully short, is the picture just wonky or do you have to drill out a portion of the nozzle?


Stewart

  
 
 
  
 From: Lee Bussy via MPA <mpa at kclo3.com>
 To: Midlands Pyrotechnic Association Mailing List <mpa at kclo3.com> 
Cc: Lee Bussy <lee at bussy.org>
 Sent: Saturday, December 12, 2015 7:33 PM
 Subject: Re: [mpa] 1# End Burn Rocket Tooling
  
 



Fiddy bucks?


I'll put them back in the basement to collect dust if not. :)









On Fri, Nov 27, 2015 at 2:26 PM, Lee Bussy <lee at bussy.org> wrote:


I thought I posted these a couple days ago, but it's not in my sent and I don;t get my own messages from the list so ... please excuse if it's duplicated.


I have a 1# end-burner set laying around with nothing to do.  I've only used these a few times, I think 4 since I made a small girandola. Ben has a much prettier set for $129, I'd like to get $75 for these maybe.
 
Ben's new tools have two rammers,one drilled and one not, and have no-pass lines.  This drilled rammer has a steel end on it to help prevent damage since these rockets are often pressed so hard.  Four rammers to this set so easier to use on a press.  Each ramer has a bell-end to get the proper contact patch but minimize tube friction.






-- 

Lee C. Bussy


-- 

Lee C. Bussy







-- 

Lee C. Bussy




_______________________________________________
MPA mailing list
MPA at kclo3.com
http://www.accelix.net/mailman/listinfo/mpa




 
 

_______________________________________________
MPA mailing list
MPA at kclo3.com
http://www.accelix.net/mailman/listinfo/mpa


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.accelix.net/pipermail/mpa/attachments/20151213/0ce5d623/attachment.html>