[mpa] Wasp Settings

[Ken Kruse]

I was practicing setting tape patterns last week. For the sake of ease, I used white plastic shells, cut off the fuse hole nipple and filled them with kitty litter for weight and a washable marker.

A little later in Ned’s tutorial he talks about the generic settings he likes to start with. Once you make those settings he recommends only adjusting shell size and tape spacing to achieve the correct pattern based on the results for your test pattern 

That does work.  I did find on one of the shells I was working with the shell size setting was about .5 larger than the shell diameter when I got it dialed in but I guess it really doesn’t  matter. 

I did try just adjusting tape spacing and or pole, one effects the other and I did not mess around with it long enough to determine how but doing that I was getting way off where I wanted to be.

Paper hemi’s will be a little different in size but I should have a good starting point to dial them in.

Kenny

 

From: MPA [mailto:mpa-bounces at kclo3.com] On Behalf Of Myrl Wieland via MPA
Sent: Sunday, December 27, 2015 1:53 PM
To: mpa at kclo3.com
Cc: Myrl Wieland <sparkymyrl at aol.com>
Subject: [mpa] Wasp Settings

 

WASP set up, does this make sense to you? Tried to get all info all together on setting up a shell.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.accelix.net/pipermail/mpa/attachments/20151228/b41dcf16/attachment.html>